Rollover to Zoom
NOTE: Images may not be exact; please check specifications.
-
Temporarily Out-of-Stock
- Call for next available delivery
Ordering Information
$1,624.94
Quick View
Getting Details
Tripp Lite’s APSINT3636VR 3-function DC to AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run, line interactive UPS or a standalone power source. Supplies up to 3600 watts of continuous 230V AC power from a 36 volt DC source. When hardwire input AC cable is energized, regulated commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. Built-in voltage regulation adjusts brownouts and overvoltages back to usable levels without using battery power. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages.
-
61.00 lbs
-
- Functions as an extended run, line interactive UPS system or standalone power supply
- Built-in voltage regulation corrects site brownouts and overvoltages without using battery power
- Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts
- 3600 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
- Battery runtime is dependent upon the size and number of user-supplied batteries in 36-volt configuration
- Hardwire input and output connections supported, DC input terminals for 36V battery connection
- Converts 36 volt DC to 230 volt AC
- Frequency control for operating stability
- Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
- Resettable circuit breaker protects APS against system overload
- Switch allows user to select between off, auto-invert and charge-only settings
- 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
- Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
- Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)
- RJ45 port allows connection of APS remote switch (part# APSRM)
- Allows unlimited runtime capability by allowing the use any number of user-supplied batteries -
Connector: Hardwire
-
DC to AC inverter, documentation
-
Color: BlackForm Factor: ExternalWeight Taxonomy: 61.07lbs
-
7.3"h x 8.5"w x 16.3"d
-
Power Provided: 3.6kWPower Provided: 3600WVoltage Provided: AC 230V
-
Voltage compatibility: 36VDC / 230VAC
Frequency compatibility: 60 Hz
OUTPUT:
Output watt capacity (watts): Continuous - 3600 watts, Overpower (up to 1 hour) - 5400 watts, Double-Boost wattage (up to 10 seconds) - 7200 watts
Output nominal voltage: AC OUTPUT: 230VAC nominal, DC CHARGER OUTPUT (DC): 36VDC nominal
Output voltage regulation:
LINE POWER (AC): Maintains 230V nominal sine wave output.
INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
DC CHARGER OUTPUT (See battery recharge rate section)
Output frequency regulation: 50 Hz (+/- 0.3 Hz)
INPUT:
Maximum input amps / watts:
DC INPUT: Full continuous load - 114A at 36VDC.
AC INPUT: 30 amps at 230VAC with full inverter and charger load
Input connection type:
DC INPUT: Set of DC bolt-down terminals.
AC INPUT: Hardwire via built in junction box with cover plate
Input cord length:
DC INPUT: User supplies cabling. 8 gauge or larger recommended.
AC INPUT: user supplies hardwire input cabling
Recommended electrical service: DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full continuous capacity). For automotive applications, professional hardwire installation with 300A minimum battery system fusing is recommended. -
This product is subject to our return policy. Please see our complete return policy for details.
-
64 lbs
-
39121006
| Description | Availability | Unit Price | ||
|---|---|---|---|---|
| View All Warranties | ||||
12