Tripp Lite EZ-Series 16KVA 14.4kW Online 200-240V 12U RM UPS System (2) L6-30R (8) C19 Outlets MBP (SU16KRT)

404.00 lbs

LEDS ALARMS & SWITCHES

LED Indicators: (6) LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options
Front panel LCD display: Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats
Alarms: Unique audible alarms for all major UPS, environmental and power conditions
Alarm cancel operation: Alarm cancel switch
Switches: (2) Switches control off/on power status and alarm-cancel/self-test operation; (2) additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement

SURGE / NOISE SUPPRESSION

UPS AC suppression response time: Instantaneous
EMI / RFI AC noise suppression: Yes

PHYSICAL

Installation form factors supported with included accessories: 4-post 19" rackmount (mounting kit included)
Included mounting accessory description: (4) sets of adjustable 4-post rack rails included
Installation form factors supported with OPTIONAL accessories: (2) post rackmount (2POSTRMKITHD); Tower (2-9USTAND)
OPTIONAL mounting accessory notes: Qty (4) 2POSTRMKITHD required; Qty (2) 2-9USTAND required
Primary form factor: Rackmount

COMMUNICATIONS

Communications interface: USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port description: Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINI installation requires removal of panel containing USB ports
PowerAlert software: Included
Communications cable: USB, DB9 serial and EPO cables included
WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications

LINE / BATTERY TRANSFER

Transfer time: No transfer time (0 ms.) in online, double-conversion mode
Transfer time (economy mode): 8 milliseconds typical power failure response in optional economy mode
Low voltage transfer to battery power (setpoint): 100V
High voltage transfer to battery power (setpoint): 300V

SPECIAL FEATURES

Cold Start (startup in battery mode during a power failure): Cold-start operation supported
Economy mode operation: Optional economy mode enables high efficiency bypass operation with a maximum output voltage variation of +/-10%. Double conversion mode is automatically restored as mains voltage varies beyond +/-10% with less than 1 millisecond transfer time between modes
High availability: UPS features Automatic inverter bypass; Manual bypass switch; Detachable hot-swap PDU; Hot swappable UPS power module; Hot swappable batteries
Green & high efficiency features: High efficiency economy mode operation; Support for daily startup and shutoff; Schedulable daily hours of economy mode operation

CERTIFICATIONS

UPS Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); RoHS (Restriction of Hazardous Substances)
UPS Certification details: IEC 61000-4-5 1995 B Surge Immunity

UPS with (2) power modules (2) battery packs, PDU with bypass switch, rack mounting rails, software, cabling, documentation

20.8"h x 17.5"w x 25.8"d

UPS input connection type: Hardwire
UPS input connection description: 3-wire single phase input (L1, L2, G)
Built-in UPS output receptacles: (2) L6-30R outlets; (8) C19 outlets
Output circuit breakers: (2) built-in 30A breakers protect (1) L6-30R outlet each; (8) built-in 20A breakers protect (1) C19 outlet each

OUTPUT

Output Capacity: 16,000VA/14,400W
Output power factor: 0.9
Output Capacity Details: Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less
Nominal Output Voltages Supported: 200V; 208V; 220V; 230V; 240V
Nominal Voltage details: Voltage selection via front panel LCD interface
Frequency compatibility: 50/60Hz (auto-selectable)
Output voltage regulation (line mode): +/- 2%
Output voltage regulation (Economy line mode): +/- 10%
Output voltage regulation (Battery mode): +/- 2%
Output AC waveform (AC mode): Sine wave
Output AC waveform (battery mode): Pure Sine wave

INPUT

Rated input current (at maximum load): 92A (200V), 88.4A (208V), 83.6A (220V), 80A (230V), 76.6A (240V)
Nominal Input Voltages Supported: 200V AC; 208V AC; 220V AC; 230V AC; 240V AC

BATTERY

Full load runtime: 5.5 minutes (14,400 watts)
Half load runtime: 13.5 minutes (7200 watts)
Expandable battery runtime: Runtime is expandable with external battery packs
External battery pack compatibility (available separately): BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH
Expandable runtime description: For best results, add external batteries in multiples of two so that both included 8kVA power modules have an equal number and type of connected battery packs
DC system voltage: 240VDC
Battery recharge rate (included batteries): Less than 8 hours from 10% to 90%
Battery replacement description: Hot-swappable, user replaceable external battery packs
Includes (2) SU8000RT3UPM UPS/Power modules and (2) BP240V10RT3U Battery packs

VOLTAGE REGULATION

Voltage regulation description: 2% output voltage regulation in standard online, double-conversion mode
Overvoltage correction: Corrects overvoltages up to 300V
Undervoltage correction: Corrects undervoltages as low as 100V

This product is subject to our return policy. Please see our complete return policy for details.

600 lbs

39121011

2 Years

2 Years

$250,000 connected equipment insurance