Rollover to Zoom
NOTE: Images may not be exact; please check specifications.
-
In Stock
- Ships in 24-48 Hours
The Microflex Modular Gooseneck microphone delivers unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it is easy to get the perfect fit for your conferencing installation. It is fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base (available separately).
This is a 10" (25.4cm) microphone with bi-color status indicator which includes a surface mount preamp (cardioid polar pattern).
This is a 10" (25.4cm) microphone with bi-color status indicator which includes a surface mount preamp (cardioid polar pattern).
-
2.50 oz
-
Audio Input Type: MicrophoneAudio Output Mode: MonoAudio System Destination: StudioAudio System Type: MicrophoneMicrophone Form Factor: ExternalMicrophone Form Factor: LavalierMicrophone Operation Mode: CardioidMicrophone Technology: Electret condenser
-
Type: Condenser (electret bias)
Frequency Response: 50Hz to 17kHz
Polar Pattern: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1kHz , open circuit voltage): -35dBV/Pa (18mV), 1 Pascal=94 dB SPL
Maximum SPL (1kHz at 1% THD, 1 kilohm load): 121dB
Equivalent Output Noise (A-weighted): 28dB SPL
Signal-to-Noise Ratio (referenced at 94dB SPL at 1kHz): 66dB
Dynamic Range (1 kilohm load at 1kHz): 3dB
Common Mode Rejection (10Hz to 100kHz): 45dB minimum
Preamplifier Output Clipping Level (1% THD): -8dBV (0.4V)
Polarity: 3-Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector; 5-Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Logic Connections: LED IN Active low (<=1.0V), TTL compatible; Absolute maximum voltage -0.7V to 50V
LOGIC OUT: Active low (<=1.0V), syncs up to 20mA, TTL compatible
Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50dB minimum
Power Requirements: 48 to 52Vdc phantom, 8.0mA -
Connectivity Technology: WiredInput Connection Technology: Wired
-
Unit, surface mount pre-amp, attached cable, documentation
-
Color: BlackColor: Gray
-
Response Bandwidth: 50 - 17000HzSensitivity: -35dBV/Pascal
-
This product is subject to our return policy. Please see our complete return policy for details.
-
1.26 lbs
-
43211719
-
Call for Warranty
-
Call for Warranty
15